Compact Pro 2020 - Winch Cam with 7" TFT + Recorder

Carplounge wireless Winch Cam Pro camera module

new model 2019 300€ discount- limited to 10 Cams!

Now even more compact! The new Winch Cam Compact Pro is the further development of the Winch Cam 2016 and has important optimizations:

Optimizations / innovations:
Weight savings of the cam by smaller size
simply placed in a feed hatch
No need for a large directional antenna on a tripod.
Transmitters and receiver antennas are screwed directly onto the opened trunk lid.
More compact case - incl. Built-in 7 "display and camera control
Smaller pack size with the same range of functions

Carplounge wireless Winch Cam compact Pro 2019

Our new camera module is designed for simple to retrofit in all Carplounge Bait Boats! Thanks to its own radio connection between the 7" monitor in waterproof ABS case and the camera unit on the boat, the set can be easily retrofitted without interfering with the electronics.

Sony CCD camera

From now on we use a special high resolution camera that was specifically designed for us. It features a Sony CCD with 700 lines of resolution. This means that our camera reaches the highest possible resolution that can be transmitted wirelessly. Additional infrared LEDs enable you to achieve perfect shots over and under water. Day and night.

Super thin Kevlar cable

The new 10 meter cable is much thinner at only 1.5mm in diameter. The cable contains a Kevlar reinforced cable jacket which means that it can easily withstand up to 30kg in force. Another big advantage is its streamlined design which causes less frictional resistance and improved spooling properties even at low temperatures. Due to those optimizations the coil is now 50% narrower and consequently significantly lighter.

Auto-Stopp

A big disadvantage of winch-cameras was the absence of a stop mechanism. This way fuses can blow or engines can overheat which can cause them to malfunction. We are the first manufacturer that has solved this problem. We included a reed contact which can detect if the camera has been completely raised out of the water and can stop the engine accordingly. It is of course possible to lower the camera again in the opposite direction after the Auto-Stopp has been executed.

Improved camera body

For the Wireless Cam 2019 we have further developed the conical stainless steel body for the camera as well as the lens. Even weed and branches under water are not a problem anymore.

Handling

The handling was also improved. The button is now directly next to the monitor. The control knob controls the camera for smooth raising and lowering of the camera up to 20m so you get a good view on the feed lot. The camera can also be attached to the boat in order to provide a first person view. This can come in handy if there are any obstacles or on the shore. For an extra charge the cable length can be extended to 20m. The bidirectional wireless range for image transmission and controls is between 300 and 400 meters.

Assembly

The assembly is very easy. Just put the winch Cam in one of the Bait Hatches (plug and play). It is not necessary to send in your boat!.

Special offer: 200€ discount + more:
For a limited time only we will include a 20 meter cable (instead of a 10m cable) worth 50€ as well as an integrated SD-recorder worth 100€ for free. Make sure not to miss it!

Box contents:

Carrying case ABS waterproof
7 inch monitor built into the case (special offer: get a SD recorder for free)
Lead acid battery and charger
Wireless camera and a 10m cable (special offer: get a 20m cable for no extra charge)

Regular delivery time: 2-3 weeks